Guide · Power and cooling
Power and cooling careers that keep a data hall online
A data hall stays up only if the electricity and the heat are both handled. Electricians and power technicians own the feed, the switchgear, the UPS, and the generators. HVAC technicians own the CRAH units, the chillers, and any refrigerant circuit. Pipefitters own building water and glycol loops. IT raises the ticket and protects the servers. IT does not own the breakers or the refrigerant.
Electrician and HVAC paths are two of the nine trades in the time-to-$100k calculator. The figure is a national baseline with assumed steps, not a data-center wage and not a ZIP-level wage. To compare apprenticeship earnings against a college path over the same years, use the trade ROI calculator.
Two paths into the building
Power work and cooling work share a site and a shift schedule. They do not share a license. If you already bend conduit, land breakers, or stand watch on a generator, the power path is the shorter step. If you already service rooftop units, chillers, or air handlers, the cooling path is the shorter step. Crossing over later is common. Starting in the wrong room, with the wrong card, wastes the first year.
Operations jobs are mostly indoors, on rounds and planned windows, because the load has to be moved before a breaker opens. Construction jobs are the build itself: switchgear rooms, busway, CRAH rows, and piping before the first server arrives. Ask which of those weeks the posting describes. A construction electrician and a critical-facilities operator are not interchangeable on day one.
What power work is
You keep utility power, UPS systems, batteries, switchgear, and standby generators available. Rounds are readings and alarms. Planned work is a shutdown window: a generator sync, a breaker rack-out, a transformer inspection. The distribution people talk about on large sites is often 13.8 kV and above. You operate and maintain a system someone else designed. Permits and a second person are normal.
A state electrician license is still what many of these employers ask for. NFPA 70E training is safety training for work on or near energized equipment. A current card is common. It is not a license that lets you practice as an electrician. NETA credentials are used by some testing employers and are split into levels. They are not required for every electrician, and the level depends on the employer. OSHA 30 is a safety course, not a trade license.
People comparing offers often talk about early data-center power roles around $75,000 to $85,000 a year, and about lead roles around $115,000 to $140,000 once overtime and shift differentials are included. Those are examples, not a posted wage on this site, and not a promise that a new apprentice earns $100,000. Base pay, night differential, and overtime are different lines. The base vs. overtime calculator shows how overtime hours change the annual figure. Per diem on a construction crew pays lodging and meals. It is not base pay.
What cooling work is
CRAH units and chillers move the heat the servers make. A hot aisle, a tripped chiller, or a refrigerant alarm is an HVAC call. Building water, glycol, and the pipes into a coolant distribution unit are pipefitter work when the loop never opens a refrigerant circuit. The equipment maker’s technician owns rack-side cold plates and specialty coolant. That split is the same one on the liquid cooling guide.
EPA Section 608 applies when the task could release regulated refrigerant, such as adding or removing refrigerant or connecting gauges. It does not cover every HVAC task, and a school certificate is not the EPA test. Controls work, BACnet, and vendor software such as Niagara sit on top of commercial mechanical time. They do not replace 608 when refrigerant is in the circuit.
Residential service is often discussed near $61,000 a year. Commercial controls work is often discussed from about $80,000 to $105,000 after you can work on both the machine and the controls. Again, examples for planning, not a wage this page measured. Affordable HVAC training shows how to read a school price. HVAC routes and VA-listed HVAC programs are the school side. Electrical school routes are on Registered Trade Schools and Veteran Trade Schools.
How a week actually feels
Halls are cold. Some galleries are hot. Generator yards are loud. You will wear hearing protection and, when the task requires it, arc-rated clothing. Nights and rotations are the lifestyle cost of a building that does not shut down at 5 p.m. The useful question is how often the maintenance window lands on your weekend, and whether on-call is paid when the phone stays quiet.
Questions for the employer
- Is this operations or construction, and which license do you require on day one?
- Which NFPA 70E or NETA level do you want, and do you pay for it after hire?
- For cooling seats: which EPA 608 type, and is the work refrigerant, water, or both?
- What is base pay, and what do nights and overtime add?
- Who holds the switching or refrigerant procedure, and who is the second person?
Bring the equipment you have already maintained, not only a job title. A data-center offer is a fit when the room matches your trade. It is a mismatch when the posting wants a controls programmer and you have only changed filters, or when it wants a journeyman and you have only a safety card.